You opened avery.com/templates, picked the right product, filled in your labels, hit print, and everything landed a few millimeters off. Text clipped at the edge, a gap that grows down the page, a row sliding into the next label. It’s maddening, and it’s almost always fixable without buying new sheets. This is an independent troubleshooting guide, not an official one, so treat the manufacturer’s own help pages as the final word on specifics.
First, work out which kind of misalignment you have
Different symptoms point to different causes, so look at your test page before touching any settings.
| What you see | Likely cause |
|---|---|
| Everything shifted the same distance in one direction | Printer margin or paper feed offset |
| Gap grows from top to bottom | Page scaling is on (“fit to page”) |
| Left side fine, right side drifts | Scaling again, or wrong paper size |
| Labels at the top fine, bottom ones off | Paper slipping in the tray or rollers |
| Text is cut off on one edge only | Content too close to the label edge, or printer’s non-printable area |
Diagnose first. Changing five things at once means you’ll never learn what fixed it.
The plain-paper test that saves your sheets
Never experiment on real label sheets. Print on regular paper, then lay it over a blank label sheet and hold both up to a window or a lamp. You’ll see right away how far the print is off and in which direction. Mark the test page with a pen, noting the direction the sheet was fed, so you can reproduce it.
If the template came from the official site, the layout is probably fine. In my experience the issue lives in the print dialog, so look there before you start dragging cells around. If you haven’t opened the layout yet, our walkthrough of finding and opening the official templates covers that part.
Fix the print dialog settings for avery.com/templates layouts
- Set scaling to 100 percent. Choose “actual size” or “none.” Settings like “fit,” “shrink to printable area,” or “scale to paper” will stretch the layout slightly, and that’s the number one reason for a drifting gap.
- Match the paper size. Letter and A4 are close but not identical. If your software thinks it’s printing on A4 and the sheet is Letter, rows will creep.
- Choose the right paper type. Pick a labels or heavy paper option if your printer offers one. It slows the feed and can change how the sheet travels.
- Turn off borderless printing. It can scale the content to bleed off the page.
- Check the PDF viewer. If you print from a PDF, the same scaling rule applies there. Pick actual size and don’t let it auto-rotate or auto-center.
Word-specific checks
Many people use the template as a Word document, where a table forms the grid of labels. A few quirks to know about.
- Turn on table gridlines so you can see the label cells. Without them, it’s easy to drag a cell border by accident.
- Don’t press Enter in a cell more than you need. An extra blank line pushes text down and can spill a row onto the next page.
- Avoid changing the font size of the whole document once the grid is set. A big paragraph mark can force a row taller.
- Check the page margins in the layout settings and leave them as the template set them. Resetting to “normal” margins often breaks the layout.
- If you paste content from another file, use “keep text only” so it doesn’t bring unwanted spacing with it.
Nudging the whole layout
If the print is consistently off by a small, even amount, shift the content rather than redrawing the grid. Some layouts let you set a small horizontal and vertical offset. If yours doesn’t, adjust the top and left margin in tiny steps, a millimeter or so at a time, and print another plain-paper test after each change. Write down the numbers that worked. They’re specific to that printer and that paper tray.
Printer-side culprits
If the dialog is correct and the print is still off, look at the machine.
Paper path and tray
Try the manual or rear feed. Sheets with a thick backing sometimes skew in a curved path. Load a single sheet, push it fully in, and adjust the guides snugly against the edges but not tight enough to bend it.
Humidity and curl
A sheet that has sat in a humid room can curl, and a curled sheet feeds crooked. Keep unopened packs flat and sealed, and store partial packs in a folder or flat box.
Driver and printer options
Some printer drivers add their own scaling or a “quiet mode” that changes the feed speed. Look through the advanced properties for anything that mentions fit, scale or margin. Restarting the printer after changing a setting is occasionally the missing step, odd as that sounds.
When the design itself is the problem
Sometimes the printing is perfect and the avery.com/templates layout is fine, but the design is simply too close to the edge. Labels have a cut tolerance. Keep text and key graphics a few millimeters inside the label and let any color background extend beyond it slightly. If you’re not sure which sheet you chose is the best fit for your project, our guide to choosing the right sheet and template helps you step back and check.
A tiny checklist to keep by the printer
- Scaling: 100 percent, never “fit.”
- Paper size: matches the sheet.
- Plain-paper test: done and held to the light.
- Gridlines: visible, no stray Enter presses.
- Feed: single sheet, correct side up, notes written down.
Once you find the settings that work for avery.com/templates layouts on your machine, save them. Many programs let you store print presets, so next time it’s one click. And if you’re still fighting it after all of the above, try printing the same file from a different program or device. If it comes out right there, you know the problem lives in the first one’s settings.
Featured photo: BrokenSphere via Wikimedia Commons (CC BY-SA 3.0).
Nail Templates: Stencils, Guides and Printable Shapes Guide
If you have ever tried to paint a clean French tip freehand, you already know why nail templates…
Router Templates for Woodworking: Make Reusable Jigs
Router templates are simple guides that let a woodworker cut the same shape again and again. A well-made…
Avery.com Templates: Finding and Using Label Layouts
www.avery.com templates explained: match your product number, pick the right layout, set up the print and avoid common…
Infographic Templates: Tips to Make Data Easy to Read
Infographic templates let you present facts, steps and comparisons as pictures that people actually finish reading. Rather than…




